OBJECTS OF THE SCUTCHER ARE:
i) To further break down and clean the cotton tufts by a beater
ii) To convert the mass of cotton fibres into a uniform thick sheet of cotton both longitudinally and transversely and wound in the form of a compactly built lap.
MATERIAL PASSAGE IN DOUBLE BEATER SCUTCHER LINE
*TWO WAY DISTRIBUTOR distribute the cotton from opening and
cleaning line of Blow room line into two scutcher equally.
* CONDENSER WITH FAN Suck the material from two way
distributor and feed it to the reserve bin of hopper feeder.
* Hopper feeder ( with Reserve feed & delivery ) mix, comb,
open and clean the cotton. At last it provide uniform feeding of cotton upon the lattice, across the full width of scutcher.
* Pedal feed motion control the feed and maintain the weight
of cotton fed per unit time as constant for lap weight unitormity.
* 3 Bladed Beater Open and clean the cotton.
* Cage with fan Suck the material from Bladed beater,
extract the lighter impurities and it provide uniform feeding as a 3
sheet form on lattice across the full width of the scutcher.
* Again one set of pedal feed motion, 2 Bladed Beater & cage
with fan is placed and above mentioned works areachieved/repeated.
*At last, calender Roller section Compress the sheet ofwhich is delivered from cage.
*Compressed sheet of cotton now pass under the dead roller. and is wound on lap roller, which is called lap.
